Manufacturers

  • Accu Tec Mfg

    Accu Tec Mfg. is primarily a manufacturer of toilet partitions, in addition to lockers. The company was founded in the 1990’s and is located in Santa Ana, California. The company manufacturers toilet partitions in 3 materials, including: solid plastic, plastic laminate, and phenolic. The company is located down the road from Alan Lewis, another toilet partition manufacturer in Santa Ana.

  • Accurate Partitions

    Accurate Partitions Corp. is a manufacturer of toilet partitions. The company was founded in 1957 and is located in Burr Ridge, Illinois. The company manufacturers toilet partitions in 6 materials, including: powder coated, stainless steel, solid plastic, plastic laminate, and phenolic. The company is a division of the ASI Group, which also owns Global Partitions and ASI Storage Products. Accurate Partitions and Global Partitions are marketed, manufactured, and distributed by the same company, but under two different brand names. All are owned by the ASI Group.

  • Alan Lewis

    Alan Lewis, Inc. is primarily a manufacturer of toilet partitions, in addition to lockers.  The company was founded in 1993 and is located in Santa Ana, California. The company is family owned and operated and manufacturers partitions and lockers in 2 materials, including: phenolic and plastic laminate. The company is located down the road from Accu Tec, another toilet partition manufacturer in Santa Ana.

  • All American Metal

    All American Metal Corp. is a manufacturer of toilet partitions. The company was founded in the 1960’s and is located in Freeport, New York (Long Island). All American Metal is run by Lawrence Knoll. The company manufacturers toilet partitions in 5 materials, including: powder coated, stainless steel, solid plastic, plastic laminate, and phenolic. The company is one of the only toilet partition manufacturers that has remained on Long Island, the origin of all metal toilet partition manufacturing. All American Metal’s facility is located a few buildings over from the former Knickerbocker Partition manufacturing facility (prior to the Knickerbocker Partition brand name being purchased and it’s New York operation closed by Flushmetal’s parent company, Karp Associates).

  • American Sanitary Partition

    American Sanitary Partition Corporation is a manufacturer of toilet partitions. The company was founded in 1932 in Long Island, New York and is currently located in Ocoee, Florida. The company manufacturers toilet partitions in 5 materials, including: powder coated, stainless steel, solid plastic, plastic laminate, and phenolic. The company is owned and operated by Ron Birkenmaier and was one of the original metal toilet partition manufacturers that originated on Long Island, New York.

  • Ampco Products

    Ampco Products is a manufacturer of toilet partitions. The company was founded in Miami in 1961. The company manufacturers toilet partitions in 7 materials, including: powder coated, stainless steel, solid plastic, plastic laminate, phenolic, and solid surface. Ampco was purchased by A&J Washrooms in 2014. It had operations in Florida, Texas, and Washington. As a result of internal company and operational issues, the AMPCO brand is no longer in business, according to industry experts and division 10 customers.

  • Atlanta Sunbelt Products

    Atlanta Sunbelt Products is a manufacturer of toilet partitions. The company was founded in 1985 and is located in Winder, Georgia. The company is owned and operated by John Busener. The company manufacturers toilet partitions in 3 materials, including: plastic laminate, solid plastic, and phenolic. The company is a regional manufacturer and provides partitions primarily to the southeastern market, mainly Georgia. The facility is located just outside Atlanta and is near ASI Global Partitions, in Eastanollee, Georgia.

  • Comres Manufacturing

    Comres Manufacturing is a manufacturer of toilet partitions. The company was founded in the late 1980’s by Steve Cook and is located in Tampa, Florida. The company manufactures toilet partitions in plastic laminate material. The company has a geographic niche by predominantly selling to regional customers in the southeastern United States. Comres was acquired by Metpar in 2018.

  • Flushmetal Partitions

    Flushmetal Partitions is a manufacturer of toilet partitions. The company was founded in the 1960’s and is located in Melville, New York (Long Island). The company manufacturers toilet partitions in 5 materials, including: powder coated, stainless steel, solid plastic, plastic laminate, and phenolic. Flushmetal Partitions is a division of Karp Associates Inc., a manufacturer of access doors and panels for walls, ceilings, floors, and roofs. In addition to Flushmetal, Karp Associates also purchased Knickerbocker Partition and manufactures the Karp Associates, Flushmetal, and Knickerbocker brands in its manufacturing plant in Melville. Flushmetal is one of the only toilet partition manufacturers that has remained on Long Island, the origin of all metal toilet partition manufacturing.

     

     

  • General Partitions

    General Partitions Mfg. Corp. is primarily a manufacturer of toilet partitions, in addition to lockers, shower compartments, and vanities. The company was founded in the 1960’s and is located in Erie, Pennsylvania. General Partitions is run by Scott Hawkins. The company manufacturers toilet partitions in 6 materials, including: powder coated, stainless steel, solid plastic, plastic laminate, phenolic, and fiberglass reinforced wood. The company also owns Rockville Partitions. Geographically, General Partitions is the furthest north of all toilet partition manufacturers, other than Hadrian in Burlington, Ontario.

  • Hadrian

    Hadrian Manufacturing Inc. is primarily a manufacturer of toilet partitions, in addition to lockers. The company was founded in 1983 by Tom Warren and Keith McAlpine when they purchased the toilet partition division of Westeel Corporation and branded their new company Hadrian Manufacturing Inc. With Tom and Keith’s retirement and sale of the company in 2001, a new era began for Hadrian. The transition to the new ownership group of James Peters, President; Gary Greenway, VP Operations; Mike Razem, VP Sales and Rob Snyder, VP Finance, was seamless as they share the same principles and value systems on which Tom and Keith built the company. The company manufacturers toilet partitions in 3 materials, including: powder coated, stainless steel, and solid plastic. Hadrian is headquarted in Burlington, Ontario (Canada) and has distribution warehouses in Ohio and Arizona.

  • Ironwood Manufacturing

    Ironwood Manufacturing, Co. is a manufacturer of toilet partitions. The company was founded in 1972 and is located in Snohomish, Washington (Seattle). The company is run by Trey Clasen, Mark Nielson, and Tom Deady. Ironwood manufacturers high-end and aesthetically pleasing toilet partitions in 6 materials, including: wood veneer, stone, solid surface, plastic laminate, phenolic, and solid plastic. The company offers high-end partition customizations, including: louvers, glass panels, captured panels, fancy moldings, transoms, inlays, intricate engravings, and custom shapes. Ironwood has established a niche and reputation as being the go-to custom manufacturer of high-end toilet partitions in the industry, providing for an alternative to traditional toilet partition stalls.

  • Knickerbocker Partition

    Knickerbocker Partition Corp. is a manufacturer of toilet partitions. The company was founded in 1951  and was one of the oldest manufacturers of commercial restroom partitions worldwide. The company was started in the Chelsea section of New York City by Nathan Greenman, a Hungarian immigrant entrepreneur who had a knack for seeing the need of a product and taking the next step in producing it. The company quickly moved to 91 Lorimer Street, Brooklyn. Succession of ownership occurred in 1960 bringing two employees together in partnership that lasted until 1987 when Joe Abbate passed away after a long battle with cancer. The partners fulfilled a dream by building a new manufacturing plant on the south shore of western Long Island, moving the company to its present location: 193 Hanse Ave., Freeport, NY in 1969. David Markbreiter remained at the helm of the company playing an integral part in its expansion and its day to day operation until his retirement in June 2007.  Succession of ownership passed to the three Markbreiter children in the early 1990’s. Stewart Markbreiter assumed the role of president upon the passing of his father. In January 2018 the Markbreiter family sold the assets of Knickerbocker Partition Corp. to Karp Associates of Melville, NY. Stewart Markbreiter remains as General Manager. The company was located down the street from All American Metal, another manufacturer of toilet partitions.

  • Laminating Technologies

    Laminating Technologies is a manufacturer of toilet partitions. The company was founded in the 1990’s and is located in Anaheim, California. The company manufacturers toilet partitions in 3 materials, including: plastic laminate, solid plastic, and phenolic. The company is a regional manufacturer which primarily services a California customer base.

  • Metpar

    Metpar Corporation is a manufacturer of toilet partitions. The company was founded in 1952 as Metpar Steel Products Corporation by Edward Buksbaum in Long Island City, New York.  In 1956, the company relocated to its current location on State Street in Westbury, NY. Metpar continued operating under the Buksbaum Family until 1981 when it was purchased by Bob Berman and John Fallarino and the name changed to Metpar Corporation. In 2005, Metpar was acquired by local private investors and has remained under such ownership since that time. In addition to its Westbury, NY headquarters, the company also has operations in Tennessee, Florida, and Utah. The company manufacturers toilet partitions in 6 materials, including: powder coated, stainless steel, dur-a-tex, solid plastic, plastic laminate, and phenolic.

  • PSISC

    Sed nec nisl eget massa lacinia interdum ut et tellus. Sed sed diam aliquam, sodales mauris consequat, elementum lorem. Suspendisse potenti. Sed malesuada orci id orci fermentum, vitae dignissim odio euismod. Nulla in leo tempus, faucibus est eu, luctus arcu. Sed vehicula ultricies sollicitudin. Nam sed dolor ipsum. Aliquam pretium sapien pretium suscipit blandit. Proin convallis placerat tincidunt.

  • Special-Lite

    Duis lorem risus, commodo a viverra eu, fringilla a tortor. Proin quis congue magna. Donec fermentum felis euismod nisl varius pellentesque. Quisque eget porta ipsum. Pellentesque rhoncus luctus tortor, sit amet iaculis velit scelerisque vitae. Fusce dictum risus eget aliquam consectetur. Sed et eros justo. Donec ac lectus sem. Aliquam ut dapibus justo. In euismod ante a semper faucibus. Nullam lacus tortor, fermentum quis tincidunt vel, condimentum sed sapien.

  • StonePly

    Pellentesque ut ullamcorper ipsum, ut viverra mi. Sed sed auctor felis. Donec volutpat nisl ut sem eleifend efficitur. Aenean euismod massa velit, et aliquet risus facilisis sed. Donec luctus aliquet metus, in interdum lorem scelerisque vel. Duis ac dolor ut libero accumsan molestie id sed orci. Quisque rutrum vitae enim rhoncus mattis. In tempor ornare lacus, in tincidunt velit vulputate ac. In mattis interdum placerat. Nunc egestas convallis aliquam. Duis nec aliquet dui, nec dignissim massa. Curabitur facilisis pretium laoreet.

  • Tex-Lam Manufacturing

    Phasellus eget pulvinar ante, dignissim tempus sem. Suspendisse eget turpis nec magna pharetra dictum nec pretium metus. Praesent facilisis volutpat neque, vitae euismod lorem aliquam ac. Fusce velit ligula, maximus eu augue sed, consequat rutrum nisi. Praesent ornare congue odio pellentesque aliquet. Aliquam erat volutpat. Vivamus vulputate purus massa, eu mollis felis sagittis et. In tincidunt faucibus tristique. Nunc convallis diam at elit accumsan fringilla. Etiam quis quam eu justo luctus dignissim. Pellentesque et porta sapien.